As for the repair of a rear driver’s side window is off the track on a 2000 Malibu?

Education

Disconnect the negative battery terminal, if the Malibu has power locks and windows. Remove the door panel, by adjusting the removal tool. Pull switches power locks and windows using the trimming or removal of a screwdriver and disconnect the electrical connectors. If the manually operated Malibu Windows, delete the window handle of the farm with clipping removal tool.

Pry the plastic plugs located behind the door pull with the screwdriver. Disconnect and remove the screws from under the sheets. Pull the door handle as if you were opening the door, and then remove the screw handle bezel and bezel.

Remove all remaining cladding panels securing the panel to the front door, using the cut elimination. Remove the door trim principal, working with the cutting tool removal. Disconnect the electrical connectors.

Remove the plastic water deflector. Peel carefully to ensure no damaged in the removal process.

Lower the window and determine the cause of the problem. Check the rollers and any other components that hold the window in place. Replace broken or damaged components. Replace the window properly if no damaged parts. Apply lubricant to the moving parts and clean any debris that may be inside the door.

Check the correct operation and reinstall the door panel. Restart the window temporarily if it is electrically operated. Move the window up and down completely and check for any problems. If no problems, to install the door, the water deflector and the pieces have been removed.