How to put a windshield wiper

It is clear that not everyone knows how to put a wiper correctly. In fact, many drivers have to resort to a friend or family member to do so or even see the obligation to take the car to the shop and pay the amount that corresponds to the mechanic. However, this is an expense that can be saved very easily. Therefore, the following will explain how to install the windscreen wipers in any vehicle in a very fast and simple.

How to put a windshield wiper? Factors to keep in mind

Typically, brushing the wiper blades is a maintenance action that must be performed every two years. However, the whole structure only has to be changed in case it is strictly necessary, ie if it has been broken by a blow or any other mishap. In fact, most drivers never have to do this replacement. In any case, if there is detected lack of mobility or strange behavior when driving them, it is essential to change them as a safety measure.

Once the problem is detected, it is time to approach a specialized shop or shop to buy some windshields. In this sense, it is very important to make sure that they are compatible with the vehicle you own. This is generally reflected in the back of the packaging that contains them, although it is also possible to ask the manager and avoid unforeseen events. Once the appropriate ones have been chosen, it is the turn to begin the installation of the windscreen wipers.

How to put a windshield wiper?

Of course, before you install the new windshield wipers, you need to remove the old ones. To do this, the base must be inspected in order to check if there are some nuts or clicks, for which it is possible to open the hood. If it is the first, you need to use a wrench with an adaptable head. Once the corresponding nut is removed, the next step will be to remove the entire windshield, after which the area must be cleaned and replaced by tightening the same nut. On the other hand, if it is clip type, simply find a small tab on the base and open it, inserting in it the tip of a flat screwdriver and lever. To put the new, just make a little pressure.

Once all this has been done, all that remains is to check that they do their job properly, that is, they clean the glass properly and that they do not produce strange noises or anything like that. If this is the case, the vehicle is ready to start moving again without any problem. It is a simple maintenance measure that is vital for safety. Therefore, it is best not to neglect it and carry it out whenever it is convenient.